Archive for June, 2012
We start selling BeagleBone cape for LCD with LVDS interface
Finally, we finished with all tests and are ready to present our new LCD cape for BeagleBone.
We will sell it as a separate assembled PCB ($34.99) to connect to any of your LCD with LVDS interface, and also as a plug-and-play bundle ($134.99) with our 10″ 1024×600 LCD with capacitive touchscreen and ambient light sensor. Here is photo of bundle in action:
Selling will start first week of July. First 10 buyers will get 10% discount. Follow us on Twitter to be among first buyers: Follow @ChalkElec
Problem with artifacts on Pandaboard ES
UPDATED 3-Jul-2012 with more simple instruction, thanks to our customer Mark!
Some of our customers found that running our v2 board on Pandaboard ES gives some artifacts on LCD picture. You can notice on below photo that pixel rows are shifted on contrast areas (black text on white background).
The same board has no artifacts running on Beagleboard, Beagleboard-xM, and original Pandaboard. To solve this problem you have to remove resistor R85 on PandaBoard-ES (second counting from the bottom in block C) and put 0 Ohm resistor or just put solder drop to short both pads.
That’s all, now artifacts should gone and you will have clear picture on Pandaboard ES.